IMAG-0000=Sample Frame
IMAG-0001=Image
IMAG-0002=Graph
IMAG-0003=Loupe
IMAG-0004=3D Histogram
IMAG-0005=3D Histogram HSL
IMAG-0006=Console
IMAG-0007=Angle Statistics Viewer
IMAG-0008=Information
IMAG-0009=Only BufferedImage with int arrays are supported
IMAG-0010=int Array Viewer
IMAG-0011=C:/Documents and Settings/nakajo/Desktop/file.png
IMAG-0012=Types other than INT_ARGB are "Not Implemented".
IMAG-0013=The type of the filter output image is not appropriate.
IMAG-0014=Filter to be cleaned up :
IMAG-0015=C:/Documents and Settings/nakajo/Desktop/filexx.png
IMAG-0016=Build
IMAG-0017=Main
IMAG-0018=Edit
IMAG-0019=RGB Histogram
IMAG-0020=HSL2 Histogram
IMAG-0021=HSL Mode
IMAG-0022=Original Image
IMAG-0023=Results of Processing
IMAG-0024=Incorrect Value
#「×」2バイトでよろしいでしょうか
IMAG-0025=\n×not connect!
#「◎」2バイトでよろしいでしょうか
IMAG-0026=\n◎connected! : 
#2バイトでよろしいでしょうか
IMAG-0027=■
#2バイトでよろしいでしょうか
IMAG-0028=・
IMAG-0029=s
IMAG-0030=e
#2バイトでよろしいでしょうか
IMAG-0031=×
#2バイトでよろしいでしょうか
IMAG-0032=○
#2バイトでよろしいでしょうか
IMAG-0033=●
#2バイトでよろしいでしょうか
IMAG-0034=－
#2バイトでよろしいでしょうか
IMAG-0035=？
IMAG-0036=Infinite Loop
IMAG-0037=TODO : Attempted to register redundantly using an unsupported type :
#SKIP
IMAG-0038= Not Implemented  : In preparation
IMAG-0039=Smoothing fine was skipped because there were too many pixels.
IMAG-0040=Strange Direction 
IMAG-0041=Not likely to appear
IMAG-0042=Illegal State : Same connection on both sides (length 2 closed loop) :
IMAG-0043=Are you using Illegal State : ScalingUtil.isEdge() for comparison? :
IMAG-0044=This boundary is a dummy
IMAG-0045=Failed to delete : 
IMAG-0046=Open an image
IMAG-0047=Save an image
IMAG-0048=Exit
IMAG-0049=Open collection of sample images.
IMAG-0050=Open the home page
IMAG-0051=Open the Help
IMAG-0052=2-window display (original image and converted image)
IMAG-0053=File
IMAG-0054=Show
IMAG-0055=Help
IMAG-0056=Failed to load due to insufficient memory.
#___は変数が入ると想定される場所です、ご確認ください
IMAG-0057=Allow Internet connection from ___? \n\n
IMAG-0058=The internet is used for the following purposes. \n\n
IMAG-0059=- Check for the latest version \n
IMAG-0060=- Acquire collections of sample images \n
IMAG-0061=- Display banners \n
IMAG-0062=\nNote: (No customer information is transmitted.)
IMAG-0063=JPEG format (.jpg)
IMAG-0064=PNG format (.png)
IMAG-0065=GIF format (.gif)
IMAG-0066=BMP format (.bmp)
IMAG-0067=Currently Save feature is not available\n\nError code : 401
IMAG-0068=Currently Save feature is not available\n\nError code : 402
IMAG-0069=License verification failed.\n\n Error code : 404
IMAG-0070=Currently Save feature is not available\n\nError code : 403
IMAG-0071=Currently Save feature is not available\n\nError code : 410
IMAG-0072=Currently Save feature is not available\n\nError code : 411
IMAG-0073=Could not generate the new code
IMAG-0074=■■■■　DEBUG MODE ■■■■
IMAG-0075=Verify
IMAG-0076= Not Implemented event 
IMAG-0077=Untitled.jpg
IMAG-0078=The specified format is not supported
IMAG-0079=The specified file already exists\n\n
IMAG-0080=\n\nDo you want to overwrite?
IMAG-0081=Questions
IMAG-0082=Save
IMAG-0083=Failed to export image due to insufficient memory\n\nTry again with a smaller data size.
IMAG-0084=Failed to output due to an error.
IMAG-0085=Sorry, but this version is not available any more.
IMAG-0086=Sorry, but this file format is not supported\n\n
IMAG-0087=Sorry, but an error occurred during loading image. \n\n
#「×」2バイトでよろしいでしょうか
IMAG-0088=The image size is too large, ( %d × %d ) so there are possibilities that \n\n
#次の2行の「•」はこのままでいいでしょうか
IMAG-0089=• Processing will take a very long time. \n
IMAG-0090=• Processing will fail due to insufficient memory. \n\n
IMAG-0091=etc. Continue anyway? (This will be fixed in the release version.)
IMAG-0092=Error : 
IMAG-0093=--- Completed Successfully [
IMAG-0094=Delete the old data
IMAG-0095=Converting...
IMAG-0096=Sorry, but conversion failed.
IMAG-0097=Sorry, but conversion failed due to insufficient memory.
IMAG-0098=Cancel the setup
IMAG-0099=Interrupt the setup
IMAG-0100=Sample Image
IMAG-0101=Obtain from the internet
IMAG-0102=Sample Collection 2
IMAG-0103=Sample
IMAG-0104=Save Settings
IMAG-0105=Number of Pixels
IMAG-0106=Magnification
IMAG-0107=Width
IMAG-0108=Height
IMAG-0109=Capacity prior to compression
#「※」2バイトでよろしいでしょうか。また、次の2行は間に容量を示す数字が入るものとして訳付けしてあります
IMAG-0110=Note: Pre-compressed size
IMAG-0111=MB (Size before compression) can be saved.
IMAG-0112=JPEG Compression
IMAG-0113=Compression Quality
IMAG-0114=[ 0: Lowest Quality / 100: Highest Quality ]
IMAG-0115=[ Original Size 
#2バイトでよろしいでしょうか
IMAG-0116=×
IMAG-0117= % [Max]
IMAG-0118=The data size is incorrect
IMAG-0119=The image size is incorrect
IMAG-0120=The value of Compression Quality is incorrect
IMAG-0121=E-mail Address
IMAG-0122=Generated Code
IMAG-0123= Original Image 
IMAG-0124=Converted Image
IMAG-0125=Apply bicubic interpolation to original image.
IMAG-0126=Display Magnification
IMAG-0127=Address 
IMAG-0128=Zoom In / Zoom out
#2バイトでよろしいでしょうか
IMAG-0129=←
#2バイトでよろしいでしょうか
IMAG-0130=↓
#2バイトでよろしいでしょうか
IMAG-0131=→
#2バイトでよろしいでしょうか
IMAG-0132=↑
IMAG-0133=Cannot be called with an Open line.
IMAG-0134=The direction cannot be determined with a length of 1 (2 including itself). \n Use "isLineLenOver()" to check if the length in the designated direction is sufficient beforehand.
IMAG-0135=A length of 3 or more is needed to view the smooth level.
IMAG-0136= Length 
IMAG-0137=Strange State
IMAG-0138=The next connection is in an illegal state.
IMAG-0139=dst image : 
IMAG-0140= \t Coordinates on original image (
IMAG-0141=SRC image
IMAG-0142=DST image
IMAG-0143=Pre-processing
IMAG-0144=The start and end coordinates are identical.
IMAG-0145=Strange!!!
IMAG-0146=Illegal State (2 discrete points?)
IMAG-0147=Illegal State2
IMAG-0148=Uncorrected
IMAG-0149=Overlapping drawing Not Implemented excluding PixDraw_edage3P!!
IMAG-0150=Strange Designation :
IMAG-0151=Overlapping drawing Not Implemented excluding PixDraw_edge3P+PixDraw_edgeEnd.
IMAG-0152=Drawing of overlapping boundary lines that are crossing is not supported. \n  jp.noids.image.scaling.pixDraw.PixDraw_edgeMulti#PixDraw_edgeMulti( ) 
IMAG-0153=This operation is not recommended. Four-point designation is impossible : \n     jp.noids.image.scaling.pixDraw.PixDraw_notEdgeFlat#setCornerColor( )
IMAG-0154=Supposed not to come.
IMAG-0155=Strange Ratio :
IMAG-0156=Color Distance :
IMAG-0157=Edge Information
IMAG-0158=Edge Generation Process :
IMAG-0159=Create the edge data :
IMAG-0160=Drawing
IMAG-0161=The range is incorrect (x,y) = 
IMAG-0162=-- Not selected --
IMAG-0163=Size of area outside image is specified :
IMAG-0164=    Image Size ( 
IMAG-0165=    Specified Pixel   ( 
IMAG-0166=Interior division C1 and C2 are the same, so interior division value could not be retrieved. \n Use "isAvailable()" to check if interior division is available beforehand.
IMAG-0167=0 divide
